Wheeled excavator is an excavating machine with tires as a walking part, referred to as wheel excavator. The wheel digging has a fast walking speed, does not damage the road surface, can transfer by itself at a long distance and can quickly replace a variety of operating devices. The maximum traveling speed in foreign countries is mostly 25-40km/h, and most domestic ones are 20-35km/h. Jinggong's wheeled excavators can rotate 360° and adopt a special chassis for convenient operation.

Jinggong hydraulic excavator a self-propelled excavator that uses a single bucket to dig soil or ore. Composed of working device, turntable and walking device. During operation, the bucket digs a full bucket and then turns to the unloading point to unload the soil, and the empty bucket returns to the excavation point for periodic operations. It is widely used in housing construction, road construction, hydropower construction, farmland reconstruction and military engineering, as well as open-pit mines, open-air warehouses and mining yards.

Features of Jinggong Grapple Excavator: 1. Simple structure and easy operation 2. The key parts are made of HARDOX 3. High operating efficiency 4. Easy to install 5. 360° hydraulic rotary type is optional Scope of application: The gripper installed on the excavator can efficiently grab scrap iron, firewood and other objects, loading and unloading, sorting, etc.

1. Antifreeze To check whether the antifreeze has expired and needs to be replaced, the antifreeze is not only used in winter, but also can play a good role in avoiding boiling and descaling in summer.Genuine antifreeze can be used for 2000 hours, and general antifreeze can only be used. 1000 hours of use. Different brands of antifreeze are different, do not mix them. 2. Water tank, hydraulic oil radiator, air conditioner condenser These places are easy to accumulate dead leaves, or the absorption of catkin fluff, which will hinder the heat dissipation of the water tank, hydraulic oil radiator and air conditioner condenser, which can easily cause high temperature of the engine, high temperature deterioration of hydraulic oil, and poor cooling of the air conditioner. 3. Grease The ambient temperature in summer is high, the working temperature of the excavator will be higher, the high temperature will make the grease soft, the adhesion performance is reduced, and it is easy to be lost, causing the lubrication performance of the working device and the rotary device to decline or even fail. 4. Tire During the summer driving of the wheeled excavator, there is a hidden safety hazard of the flat tire. Always check the braking performance of the whole machine and cool the tires. When the tire pressure and tire temperature are too high, the car should be parked in a cool place to cool down before continuing to drive.  5, wading operations In summer, there is a lot of rain. When wading, don't let the water exceed the center of the upper roller; when working in water, don't make the excavator tilt at an angle of more than 15° to avoid water in the upper structure; the crawler tensioning cylinder must also be loose and tight (Remove the sludge on the cylinder to prevent the cylinder from rusting).

Jinggong rotary wood grab, stone grab, and sugarcane grab entered the Southeast Asian market again. Our fixtures are made of special steel, light in texture and high in wear resistance. The clamp adopts a new type of worm gear design, which can rotate 360 degrees clockwise and counterclockwise freely.

Today, the 2020 China International Agricultural Machinery Exhibition with the theme of "Agricultural Mechanization, Rural Revitalization, and Poverty Alleviation" opened in Qingdao, Shandong Province. Excavators exhibited by Jinggong include JG30S mini wheel excavator, JG75SS-9 hydraulic excavator, JG120S excavator and JG150S wheeled excavator with rock grapple.